Zeiss LSM 880 with Airyscan

Zeiss LSM 880 with Airyscan

(Room B502b)

Laser scanning confocal microscope for both fixed and live cell imaging. Mounted on a motorized Zeiss inverted microscope.

The system is equipped with PicoQuant FLIM (Fluorescent Life-Time Imaging Microscopy) with it's own set of detectors, pulse laser and analysis computer.


  • 2 PMT detectors
  • 1 GaAsP detector
  • Airyscan detector
    • Improves resolution or speed
  • 2 photon counting GaAsP detectors
    • Green and red channels
    • Allows FLIM
  • Transmitted light detector (T-PMT)


  1. 10x air
  2. 20x air
  3. 40x oil
  4. 40x water
  5. 63x oil

Laser lines:

  • Diode 405 nm
  • Argon
    • 458 nm
    • 488 nm
    • 514 nm
  • Diode 561 nm
  • He-Ne 633 nm
  • 488 nm pulse laser for FLIM

Filter cubes (for widefield ocular observation):

  • DAPI
  • FITC
  • Triple filter (DAPI/FITC/TRITC)

Environmental Chamber operating temperature

The LSM 880 has a full environmental chamber for imaging live cells. While the chamber and microscope are heating up or cooling down the light path distances are constantly changing. Because of this it is not recommended to image while the chamber temperature is changing.

To keep the chamber at a steady temperature, it should be either heated to (+37 degrees Celsius) or at room temperature for the whole day.

The first reservation created for a given day determines the temperature of the system.

Mark the desired temperature in the "Description" field of the reservation on Scheduler. Do this even if you're not the first user to reserve the microscope. The first user of the day should turn on the heating if the system is reserved for +37.

The heating is equipped with a timer, so it can be set to turn on before the start of your reservation. It will take at least 1 h for the heating to stabilize the temperature and at least two hours for it to cool down to room temperature.

NB! If you are imaging fixed cells, you can do the imaging at +37 too.