Flow Cytometry Unit provides flow cytometric analysis and cell sorting services as well as flow cytometry training and education for new users. It is possible to use most of the instruments independently after a training period. Welcome!
We offer you assistance with experiment planning and sample preparation if you wish. Contact us to discuss more.
Located at Biocenter flow cytometry unit.
The BD LSRFortessa Flow Cytometer analyser can be used after training. BD LSRFortessa has 4 lasers: violet 405 nm, blue 488 nm, yellow green 561 nm and red 640 nm. You can analyze up to 16 fluorescence and 2 scatter parameters simultaneously. Samples can be analyzed with 3 different flow rates: low (12 µL/min), medium (35 µL/min) and high (60 µL/min). Flow rate can also be adjusted with sample fine adjustment (6-24, 17.5-70 and 30-120 µL/min, respectively). BD LSRFortessa uses BD FACSDiva Software v 8.0
Located at Biocenter flow cytometry unit.
The BD LSR II Flow Cytometer analyser can be used after training. BD LSR II has two lasers: blue 488 nm and red 633 nm. You can analyze up to 6 fluorescence and 2 scatter parameters simultaneously. Samples can be analyzed with 3 different flow rates: low (12 µL/min), medium (35 µL/min) and high (60 µL/min). Flow rate can also be adjusted with sample fine adjustment (6-24, 17.5-70 and 30-120 µL/min, respectively). LSR II uses BD FACSDiva Software v 8.0.
Located at Biomedium and Viikki sorting flow cytometry units.
The BD FACS Aria II Flow Cytometer sorter can be used after training. Cells can be sorted into 1 ml tubes, 12 x 75 mm tubes, 15 ml falcon tubes, into various plates (single or multiple cells/well), or onto microscope slides. Aria is capable of simultaneous 4-way sorting. Sample temperature can be adjusted during analysis and sorting (+4°C - +37°C). FACSAria uses BD FACSDiVa Software v 8.0.
Biomedicum: 12 detectors: FSC, SSC, 5 fluorescence detectors from the 488 mn, 3 fluorescence detectors from the 633 nm, and 2 fluorescence detectors from the 405 nm laser.
Viikki: 11 detectors: FSC, SSC, 5 fluorescence detectors from the 488 mn, 2 fluorescence detectors from the 633 nm, and 2 fluorescence detectors from the 405 nm / 375 nm laser.
Located at Biomedicum flow cytometry unit.
The BD Accuri C6 Flow Cytometer analyser can be used after training. The instrument has a blue (488 nm) and a red (640 nm) laser. Simultaneously you can analyse with 4 different fluorescent and 2 scatter parameters.
The selectable laser module allows 3 different filter configurations: 3 blue and 1 red (standard setting), 2 blue and 2 red or 4 blue. User changeable optical filters available are: 530/30 nm, 585/40 nm, 610/20 nm, 670 nm (LP), 675/25 nm and 780/60 nm. There are also optional 99 % attenuation filters for each detector.
Located at Biomedicum flow cytometry unit
The NovoCyte Quanteon 4025 and NovoSampler Q System Bundle Flow Cytometry analyser can be used after training (trainings will start end of September 2021). Instrument is equipped with 4 lasers Violet (405nm), Blue (488nm), Yellow-Green (561nm) and Red (637nm) with 2 scatter parameters and 25 fluorescent parameters.
Sampling Format: 40-tube rack for 1.5 mL, 12 x 75 mm, 2 mL tubes and 24-well, 48-well, 96-well, 384-well plates
Located at Biomedicum flow cytometry unit.
The SH800Z Cell Sorter can be used after training. The instrument has two lasers: Blue (488 nm) and Yellow-Green (561nm).
You can analyze up to 6 fluorescence and 2 scatter parameters.
The instrument is equipped with PMTs with optimal filters for detecting fluorescent proteins.
Two different nozzle chips are avilable 100µm and 130µm nozzle chips with automatic alignment for sorting. Cells can be sorted into 12 x 75 mm tubes or 15 ml falcon tubes with two way sort. It is also possible to sort on to various plates up to 384 well format (single or multiple cells/well).
The sort chips combined with the possibility to have your own sample line ensures pure sorts.
Located at Biomedicum flow cytometry unit.
BD Influx Cell sorter is avilable only with an operator.
The instrument has four lasers: Violet (405nm), Blue (488 nm), Yellow-Green (561nm) and Red (640nm). You can analyze up to 18 fluorescence and 2 scatter parameters. Nozzles sizes available: 70, 86, 100 and 140 µm. Cells can be sorted into 0,5-50 ml tubes and onto various plates, up to 384-well plates (single or multiple cells/well), or onto microscope slides. The system can be setup for simultaneous 6-way sorting (into tubes).
Located at Biomedicum flow cytometry unit.
You can run two samples at a time with preinstalled programs for different applications. Use C tubes for dissociation of tissues to obtain single-cell suspension and M tubes for homogenization of tissues or cells to isolate subcellular material. Tubes are not provided. No training necessary, but permission and reservation is required.
BD FACSDiva Software:
NovoExpress:
BD Accuri C6 Software:
BD Accuri C6 Software Quickstart Guides:
FlowJo:
