# Original field recordings

These pages provide a general description of the original field recordings of the Finnish Reflection Experiment (FIRE).

#### General

The original, demultiplexed and correlated field recordings from Specgeofizika are available as a set of SEG-Y files. Each SEG-Y contains 500 to 700 megabytes of field recordings or about 20 to 30 shots.

Noise tests and accidental or failed measurements are included in this data set and can be identified using the original observer’s logs. The samples are in IBM floats. The sampling interval is 2 milliseconds and the number of samples per trace is 15 000.

The data is very elementary and raw, so we do not recommend anyone to look into these unless you really want to start processing from scratch. Carefully chosen, quality-controlled shot gathers with all relevant trace headers set are available under Shot gathers and have been prepared at the University of Helsinki, Institute of Seismology during the year 2016.

#### Geometry

Finnish Reflection Experiment is a 2-D crooked-line seismic survey conducted using 4 to 5 Vibroseis sources per shot point. The nominal shot point interval is 100 meters.

The recording geometry is split-spread (asymmetric at the end of lines) with 362 active channels separated by a nominal group interval of 50 meters. This results in a nominal fold of ~ 90 for the entire survey.

#### Naming of files

The naming of files follows the general pattern

 Fire_(line)_(subdivision)_(min)-(max).sgy

where the last two numbers separated by a dash specify a range of field records in observer’s logs. The range varies irregularly.

The 3200-byte textual header does not contain anything significant. The 400-byte binary header has not been set.